Jordan, It probably burned up one of the capacitors on the board that signal the UPS to turn the alarm off. I've had this happen before and I unplugged everything, turned the UPS off, disconnected the batteries and then opened the UPS up to cut off the tiny, annoying, surprisingly loud speaker. I then put everything back together and that was the end of it:) If you need UPS, Surge, or Power Related help contact Daniel @ Power & Systems Innovations 800.260.2259 or go to our website: Feb 02, 2013 . Hi, You can fix it by doing this. But first you need to make sure you leave your house for at least 4 hours so you don't have to be hearing that frigging noise, IT CAN BE DONE!

My unit would start beeping as soon as I plug it in wall, and red light come on, the software is telling me the battery is unplugged this is what i did in order. Unplug all cords, connected to the unit, and power cord to the wall. Oracle Bi Server 1 Odbc Driver on this page. Hold the power button 3. Still holding the power button, Connect it to wall. (red light would be on but no beep) 4.

I watched TV for 6 hours, red light still flashing 5. Disconnect from wall 6 connect back to wall I heard the unit click one time and green light came on, is charging now. Jan 27, 2008 . Hello, My name is Vikram Kumar Thumu, from India-Hyderabad. I have seen your message on the issue related to Shutdown of UPS whenever there is a Power Surge.

I would like to provide my suggestions on the issue. I hope that this should work for you and will resolve the issue. I see that you are using Generally, the issue happens if you are not using the UPS as per Manufacturer specifications or if it is overloaded frequently then UPS shutdowns To isolate the issue, I recommend you to check and go through below information. If you see ON BATTERY a Yellow LED OR Flashing Yellow LED with Audible Alarm (Beeping) then it means this condition for the On-Battery LED can indicate 1of 2 problems: They are: 1. The UPS is on battery backup and an intermittent audible alarm is on. The UPS will begin shutdown procedure. Battery is low.

The UPS will sta rt shut down. The buzzer sounds an audible alarm. If you see a Solid Red on your UPS, then it means that UPS is either fault or overload. It happens if there is a issue with UPS. The LED will be lit continuously and the unit will sound an audiable alarm for 10 seconds. Other cause could be with Battery is weak or Bad, the Battery needs to be replaced under this condition.

The views demonstrate how the information might appear on Windows Vista. The visual styles for the control have been set to the. Hardware compatibility list. Masterguard (various) masterguard: 1: Maxxtro: UPS 600 VA serial port. Ups for uninterruptible power supply.

If you use a Flashing Red LED, then it means that battery is trying to give more power than it should. It happens then UPS is overloaded. Let me tell you,,,, Only data sensitive equipment such as a computer, monitor and external drive should be plugged into these outlets. Battery power is automatically provided in case of a power outage.

Power (AC or battery) is not supplied to these outlets when the UPS is switched off. (Do not plug surge protectors or power strips into the battery back up outlets). Most Important factor that effects the issue is that, Caution: Never connect a laser printer or scanner to the backup outlets of UPS with other computer equipment. A laser printer or scanner draws significantly more power when in use than when idle. This may overload the UPS. And caused the UPS to shutdown whenever there is Power Surge To isolate the issue further, let me tell you the way where you can test the UPS if it is fine or not. Charge the UPS for around 4 hours, and try below steps.

To Conduct a Self Test Use the self-test to verify both the operation of the UPS and the condition of the battery. In normal utility power, push the On/Off/Test button less than 2 seconds and the UPS performs a self-test function. During the self-test, the UPS operates in back-up mode. During the self-test, the UPS briefly operates on- battery backup power (the on-battery LED comes on).